Key- Kits your RRC partner in Egypt providing RRC's NEBOSH &IOSH e-Learning courses

PDF Print E-mail

 

Key- Kits your RRC partner in Egypt providing RRC's NEBOSH & IOSH e-Learning courses

 

 

- NEBOSH International General Certificate in Occupational Safety & Health

Course Overview

The NEBOSH International General Certificate is designed for managers, supervisors, worker representatives and others who require an understanding of health and safety principles and practices. Candidates are likely to be employees of large organisations operating outside the UK, or of multinational companies already working to international standards but who need to adapt these to accord with local needs and practice.

The syllabus omits specific reference to any national legal requirements but, instead, focuses on international standards, in particular ILO codes of practice. In common with the national award, however, the syllabus is structured according to a recognised management framework.

Syllabus Summary

IGC1

· Foundations in health and safety

· Health and safety management systems (SMS): Policy

· Health and safety management systems (SMS): Organising

· Health and safety management systems (SMS): Planning

· Health and safety management systems (SMS): Measuring, audit and review

IGC2

· Workplace hazards and risk control

· Transport hazards and risk control

· Musculorskeletal hazards and risk control

· Work equipment hazards and risk control

· Electrical safety

· Fire safety

· Chemical and biological health hazards and risk control

· Physical and psychological health hzards and control

Examinations

The examination comprises two 2-hour written papers and a practical assessment. Each written paper consists of one 'long-answer' question and ten 'short-answer' questions. All questions are compulsory. The practical assessment consists of carrying out a risk assessment of a workplace and preparing a short report.

'All e-Learning courses are run in partnership with RRC Training and under RRC's accreditations, approvals and licenses’

NEBOSH International Technical Certificate in Oil and Gas Operation Safety

Course Overview

This qualification is specifically designed for people with safety responsibility in the oil and gas industry. The qualification focuses on international standards and management systems, enabling students to effectively discharge workplace safety responsibilities both onshore and offshore. The Certificate also highlights the importance of process safety management in the oil and gas industry.

There are no specific entry requirements for this qualification, however it is highly recommended that students have an existing underpinning knowledge of safety issues or have completed a NEBOSH Certificate level qualification previously.

.

Syllabus Summary

ELEMENT 1: Health, Safety and Environmental Management in context

Learning from Incidents

Hazards inherent in oil and gas

Risk management techniques used in the oil and gas industries

Safety cases and safety reports

ELEMENT 2: Hydrocarbon Process Safety 1

Contractor management

Process safety management (PSM)

Role and purpose of a 'permit-to-work' system

Key principles of shift handover

Plant operations and maintenance

ELEMENT 3: Hydrocarbon Process Safety 2

Failure modes

Safety critical equipment controls

Safe storage of hydrocarbons

Furnace and boiler operations

ELEMENT 4: Fire Protection and Emergency Response

Fire and explosion risk in the oil and gas industries

Emergency response

ELEMENT 5: Logistics and Transport Operations

Marine transport

Land transport

Examinations

The examination is comprised of one 2-hour written papers which consists of one 'long-answer' question and ten 'short-answer' questions. All questions are compulsory.

'All e-Learning courses are run in partnership with RRC Training and under RRC's accreditations, approvals and licenses’

- NEBOSH International Diploma in Occupational Safety & Health

Course Overview

The NEBOSH International Diploma is designed for individuals who want to progress their career in health & safety and to develop the international knowledge and skills in order to become an international health & safety practitioner.

All occupational health & safety practitioners (OHASPs) need to have a common core of knowledge in order to practice effectively. This common core of knowledge must be transferable between the different occupational sectors in which OHASPs may work, ranging across all parts of industry, commerce and the public sector. The NEBOSH International Diploma in Occupational Health and Safety provides the knowledge and understanding that underpins competent performance as an OHASP.

There are no prerequisite entry requirements, though students will find it helpful to have completed the International General Certificate first. Students should also be aware that this is a demanding qualification - approximately equivalent to third year degree level - and therefore may find is very difficult if they do not have this background knowledge and/or the ability and application to study at this level.

Payments for eLearning courses made within the UK (only) are subject to UK VAT at the prevailing rate.

Syllabus Summary

· Unit A:  Managing health and safety

· Unit B:  Hazardous agents in the workplace

· Unit C:  Workplace and work equipment

· Unit D:  Application of health and safety theory and practice (Assignment)

Examination & Assignment details

The examinations are held twice each year, January and July, and comprise of one 3-hour written paper for each of the core units (A, B & C) (three 3-hour examinations in total). Students must complete a workplace based assignments for unit D. Only students who have enrolled with NEBOSH through an accredited centre are eligible to register for the examination.

'All e-Learning courses are run in partnership with RRC Training and under RRC's accreditations, approvals and licenses’

IOSH Managing Safely

Course Overview

The Managing Safely course is for those required to manage safely and effectively in compliance with both their organisation’s policy and best practice in health and safety.

The course aims to ensure that safety requirements are appreciated by people employed as line managers, and to enable them to review their own departmental systems for safety, introducing new controls or implementing changes as appropriate to ensure safety in the workplace.

Payments for eLearning courses made within the UK (only) are subject to UK VAT at the prevailing rate.

IOSH Managing Safely Syllabus Summary

· Explain ‘working safely’.

· Explain the component parts of a recognised safety management system such as HSG65, BS 8800, and OHSAS 18001.

· Identify the data and techniques required to produce an adequate record of an incident and demonstrate the procedure for an accident investigation, recognising the human factors involved.

· Describe statutory requirements for reporting and procedures for checking for non-reporting.

· Describe methods of basic trend and epidemiological analysis for reactive monitoring data.

· Define ‘hazard’ and ‘risk’, and describe the legal requirements for risk assessment.

· Demonstrate a practical understanding of a quantitative risk assessment technique and the data required for records.

· Describe workplace precaution hierarchies.

· Prepare and use active monitoring checklists and implement schedules for active monitoring, recording results and analysing records.

· Outline the main provisions of the Health and Safety at Work etc Act 1974 and the Management of Health and Safety at Work Regulations 1999.

· Outline relevant health and safety legislation, codes of practice, guidance notes and information sources such as the Health and Safety Executive.

On-line Examination / Assessment

The final examination is taken on-line after you have studied the course material. Understanding of the course material is evaluated by means of a multiple choice examination comprising of a mixture of short and multiple choice online questions, plus an end of course assignment.

'All e-Learning courses are run in partnership with RRC Training and under RRC's accreditations, approvals and licenses’


IOSH Working Safely

The IOSH Working Safely Course is designed for all types of people in the full range of business organisations. The personnel to attend this course are process workers, office workers, engineers, supervisory and management in all types of organisations, who need an initial understanding of health and safety at work.

By the end of the course delegates will have knowledge of:

hazards and risk assessments in the workplace
health and safety legislation and relevant regulations
the responsibilities of managers and supervisors and themselves for the management and implementation of safety in the workplace
apply principles of good practice in health and safety
be able to use effective communication
make sure that health and safety law is obeyed within their own workplace.

Course Content:


Hazard, risk and risk control
Work equipment
Safety management systems
Vehicle Movement
General housekeeping
Display Screen Equipment
Noise
Fire Prevention
Chemicals and substances
Manual Handling

Assessment:

Delegates must sit a short closed-book assessment in which they complete both a multi-choice assessment paper and three hazard spotting assessment papers.

 

'All e-Learning courses are run in partnership with RRC Training and under RRC's accreditations, approvals and licenses’

 

 

Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

NEBOSH/ IOSH www.rrc.co.uk

Scholarship Fee( EP)

NEBOSH International General Certificate (Full)

5433

NEBOSH International Fire Certificate (IFC1/2 Only)

3500

NEBOSH International Construction Certificate (ICC1/2 Only)

3500

NEBOSH International Oil and Gas Certificate

3900

NEBOSH Certificate in Environmental Management

3900

NEBOSH Environmental Diploma

5000

NEBOSH International Diploma FULL

16133

NEBOSH International Diploma Unit A

5500

NEBOSH International Diploma Unit B

5000

NEBOSH International Diploma Unit C

5000

NEBOSH International Diploma Unit

3000

IOSH Working Safely

850

IOSH Managing Safely

1100

 

Register for any course and get instant prize from Key Kits

please press here to know more about RRC  courses


 

Do you find this interesting?

Send it to a friend!

Your Name:
Your Email *:
Friend Email *:
Add Your Personalized Message:
 
free pokerfree poker